You are here: Home > Tools > Automotive Tools > Brake, Wheel & Suspension
Brake, Wheel & Suspension having capable of making 180° bends in copper, brass, aluminum and handles most ball joints.
Sort By:
Page of 1
ATD-5472 3-In-1 180anddeg; Tubing Bender ATD-5472 3-In-1 180anddeg; Tubing Bender

  • ATD-5472 3-In-1 180anddeg; Tubing Bender
  • Capable of making 180° bends in copper, brass, aluminum
  • Just one tool works on (3) sizes of tubing: 1/4", 5/16" and 3/8"
  • Shipping Weight: 1.0 lbs.

Usually Ships in 3 to 5 Business Days
Our Low Price: $21.95
ATD-5314 4-Inch C-Clamp ATD-5314 4-Inch C-Clamp

  • ATD-5314 4-Inch C-Clamp
  • Malleable iron frame
  • Steel screw, swivel and sliding cross pin handle
  • 2-3/4" depth, 9/16" diameter
  • Weight: 1.6 lbs.

Usually Ships in 3 to 5 Business Days
Our Low Price: $8.95
ATD-8621 Rear Axle Bearing Puller Set ATD-8621 Rear Axle Bearing Puller Set

  • ATD-8621 Rear Axle Bearing Puller Set
  • These pullers quickly remove semi-floating rear axle bearings
  • Use with 5/8"-18 threaded slide hammers (such as) ATD-3045
  • Molded storage case included
  • Shipping Weight: 1.8 lbs.

Usually Ships in 3 to 5 Business Days
Our Low Price: $38.95
ATD-8700 Ball Joint Separator ATD-8700 Ball Joint Separator

  • ATD-8700 Ball Joint Separator
  • Place this tool between the ball joint and steering knuckle
  • Given a few sharp blows with a hammer, these parts separate
  • Handles most ball joints
  • Opening: 15/16"
  • Length: 12"
  • Shipping Weight: 2.0 lbs.

Usually Ships in 3 to 5 Business Days
Our Low Price: $11.95
ATD-3052 Alternator/Power Steering Pulley Puller and Installer ATD-3052 Alternator/Power Steering Pulley Puller and Installer

  • ATD-3052 Alternator/Power Steering Pulley Puller and Installer
  • Reverse the jaws to pull the alternator internal bearing
  • This puller fits some AMC vehicles
  • Will not work on 3.3L and 3.5L Chrysler engines
  • Molded storage case included

Usually Ships in 3 to 5 Business Days
Our Low Price: $38.95
ATD-5147 7-Piece Drum Brake Tool Set ATD-5147 7-Piece Drum Brake Tool Set

  • ATD-5147 7-Piece Drum Brake Tool Set
  • Set Contains:
    • 5/16" (3/4" diameter) Brake Spring Tool
    • 9-3/4" Brake Spring Tool
    • 8-1/2" Brake Bleeder Wrench (5/16" and 3/8" hex box)
    • 9" Brake Bleeder Wrench (1/4" and 3/8" hex box)
    • 90° 5-1/8" Brake Bleeder Wrench (8mm and 10mm)
    • 8-3/16" Brake Adjustment Tool (29° and 45°)
    • 8-1/4" Brake Adjustment Tool (29° and 45°)
    • For servicing most foreign and domestic brakes
    • Molded storage case included
    • Shipping Weight: 2.5 lbs.

Usually Ships in 3 to 5 Business Days
Our Low Price: $34.95
ATD-3060 11 Piece Locking Wheel Nut Remover ATD-3060 11 Piece Locking Wheel Nut Remover

  • ATD-3060 11 Piece Locking Wheel Nut Remover
  • 1/2" square drive removes locking wheel nuts
  • Use with impact wrenches

Usually Ships in 3 to 5 Business Days
Our Low Price: $89.95
ATD-8660 Electronic Digital Rotor Gauge ATD-8660 Electronic Digital Rotor Gauge

  • ATD-8660 Electronic Digital Rotor Gauge
  • 0-5.60" (0-144mm) range, .001" (.01mm) graduations
  • Easy-to-read digital display with SAE/Metric conversion
  • Measures brake rotors and ball joints
  • Pointed anvil and 3.5" long arms to inspect rotors before turning

Usually Ships in 3 to 5 Business Days
Our Low Price: $52.95
ATD-7561 MacPherson Strut Spring Compressor ATD-7561 MacPherson Strut Spring Compressor

  • ATD-7561 MacPherson Strut Spring Compressor
  • ATD Can be used with an impact wrench or hand tool
  • No other clamps or devices are needed
  • Maximum Capacity: 6" OD
  • Wire Diameter: 5/8"
  • Shipping Weight: 6.1 lbs.

Usually Ships in 3 to 5 Business Days
Our Low Price: $29.95
ATD-3054 MacPherson Strut Spring Compressor ATD-3054 MacPherson Strut Spring Compressor

  • ATD-3054 MacPherson Strut Spring Compressor
  • Broad spring contact
  • ACME threaded rod and built-in detent
  • Designed to compress most sizes of MacPherson strut springs
  • Molded storage case included
  • Shipping Weight: 7.0 lbs.

Usually Ships in 3 to 5 Business Days
Our Low Price: $56.95
ATD-7414 Brake Drum Handler ATD-7414 Brake Drum Handler

  • ATD-7414 Brake Drum Handler
  • Works on 15" and 16-1/2" drums
  • Overall: 61-1/2" L x 19-3/4" W x 17-3/4" H
  • Low Lift Height: 10-1/4"
  • High Lift Height: 15-1/4"
  • Wheel Diameter: 8"
  • Shipping Weight: 58 lbs.

Usually Ships in 3 to 5 Business Days
Our Low Price: $339.95
ATD-7563  Universal Strut Spring Compressor ATD-7563 Universal Strut Spring Compressor

  • ATD-7563
  • Universal Strut Spring Compressor
  • Fits a wide range of struts without the inconvenience of special adapter shoes
  • Compresses springs of 4" to 8" OD with wire diameters of 7/16" to 11/16"
  • Works by hand or with impact wrench
  • Jaws of the compressor are held in place by safety locking pins 
  • Molded storage case included

 

Usually Ships in 3 to 5 Business Days
Our Low Price: $224.95