You are here: Home > Venting > HeatFab EZ Seal Vent Pipe > Accessories
EZ Seal Accesories like storm collar, support clamp, blast gate, roof flashing, expander kit in various sizes are available at affordable prices.
Sort By:
Page of 1
Heat Fab 4526SS Saf-T Vent SC 5" Diameter - 304 Storm Collar Heat Fab 4526SS Saf-T Vent 5" Diameter - 304 Storm Collar

  • Heat Fab 4526SS
  • 5" DiameterStorm Collar
  • Saf-T VentMade from Type 304 stainless steel
  • May be tightened and sealed around the vent to prevent water from entering the building
  • Use as a decorative shield to cover holes where the vent penetrates interior concrete and masonry walls
  • Should not be installed in the direct path of flue gases

Usually Ships in 24 Hours
List Price: $25.42
Our Low Price: 21.55
3 in stock!
Heat Fab 4726SS Saf-T Vent SC 7" Diameter - 304 Storm Collar Heat Fab 4726SS Saf-T Vent 7" Diameter - 304 Storm Collar

  • Heat Fab 4726SS Saf-T Vent
  • 7" DiameterStorm Collar
  • Saf-T Vent
  • Made from Type 304 stainless steel
  • May be tightened and sealed around the vent to prevent water from entering the building
  • Use as a decorative shield to cover holes where the vent penetrates interior concrete and masonry walls
  • Should not be installed in the direct path of flue gases

Usually Ships in 24 Hours
List Price: $32.55
Our Low Price: 27.65
9 in stock!
Heat Fab 4727SS Saf-T Vent SC 7" Diameter - 304 Support Clamp Heat Fab 4727SS Saf-T Vent 7" Diameter - 304 Support Clamp

  • Heat Fab 4727SS
  • 7" DiameterSupport ClampSaf-T Vent
  • Made from Type 304 stainless steel
  • Use on horizontal systems to provide support at the required 6-foot intervals
  • Use singly as a saddleUse in pairs by clamping around the outer jacket and suspend from a single rod or cable
  • Sold in pairs, with two half-shells and two ¼-20 nuts and bolts

Usually Ships in 24 Hours
List Price: $21.20
Our Low Price: 18.05
12 in stock!
Heat Fab 4527SS Saf-T Vent SC 5" Diameter - 304 Support Clamp Heat Fab 4527SS Saf-T Vent 5" Diameter - 304 Support Clamp

  • Heat Fab 4527SS
  • 5" Diameter
  • Support ClampSaf-T Vent
  • Made from Type 304 stainless steel
  • Use on horizontal systems to provide support at the required 6-foot intervals
  • Use singly as a saddleUse in pairs by clamping around the outer jacket and suspend from a single rod or cable
  • Sold in pairs, with two half-shells and two ¼-20 nuts and bolts

Usually Ships in 24 Hours
List Price: $20.58
Our Low Price: 17.45
12 in stock!
Heat Fab 4326SS Saf-T Vent 3" Diameter - 304 Storm Collar Heat Fab 4326SS Saf-T Vent 3" Diameter - 304 Storm Collar

  • Heat Fab 4326SS
  • 3" Diameter
  • Storm Collar
  • Saf-T Vent
  • Made from Type 304 stainless steel
  • May be tightened and sealed around the vent to prevent water from entering the building
  • Use as a decorative shield to cover holes where the vent penetrates interior concrete and masonry walls
  • Should not be installed in the direct path of flue gasesar

Usually Ships in 24 Hours
List Price: $23.31
Our Low Price: 19.85
13 in stock!
Heat Fab 4426SS Saf-T Vent 4" Diameter - 304 Storm Collar Heat Fab 4426SS Saf-T Vent 4" Diameter - 304 Storm Collar

  • Heat Fab 4426SS
  • 4" DiameterStorm Collar
  • Saf-T VentMade from Type 304 stainless steel
  • May be tightened and sealed around the vent to prevent water from entering the building
  • Use as a decorative shield to cover holes where the vent penetrates interior concrete and masonry walls
  • Should not be installed in the direct path of flue gases

Usually Ships in 24 Hours
List Price: $23.31
Our Low Price: 19.85
12 in stock!
Heat Fab 4327SS Saf-T Vent 3" Diameter - 304 Support Clamp Heat Fab 4327SS Saf-T Vent 3" Diameter - 304 Support Clamp

  • Heat Fab 4327SS
  • 3" Diameter
  • Support Clamp
  • Saf-T VentMade from Type 304 stainless steel
  • Use on horizontal systems to provide support at the required 6-foot intervals
  • Use singly as a saddle
  • Use in pairs by clamping around the outer jacket and suspend from a single rod or cable
  • Sold in pairs, with two half-shells and two ¼-20 nuts and bolts

Usually Ships in 24 Hours
List Price: $21.20
Our Low Price: 18.05
6 in stock!
Heat Fab 4427SS Saf-T Vent 4" Diameter - 304 Support Clamp Heat Fab 4427SS Saf-T Vent 4" Diameter - 304 Support Clamp

  • Heat Fab 4427SS4"
  • DiameterSupport Clamp
  • Saf-T VentMade from Type 304 stainless steel
  • Use on horizontal systems to provide support at the required 6-foot intervals
  • Use singly as a saddleUse in pairs by clamping around the outer jacket and suspend from a single rod or cable
  • Sold in pairs, with two half-shells and two ¼-20 nuts and bolts

Usually Ships in 24 Hours
List Price: $21.20
Our Low Price: 18.05
7 in stock!
Heat Fab 9301BG Saf-T Vent EZ Seal 3" Diameter Blast Gate Heat Fab 9301BG Saf-T Vent EZ Seal 3" Diameter Blast Gate

Heat Fab 9301BG Saf-T Vent EZ Seal 3" Diameter Blast Gate. Use to balance the draft of an appliance when the vent is terminated with a fan.

Usually Ships in 24 Hours
List Price: $116.14
Our Low Price: 80.95
1 in stock!
Heat Fab 9401BG Saf-T Vent EZ Seal 4" Diameter Blast Gate Heat Fab 9401BG Saf-T Vent EZ Seal 4" Diameter Blast Gate

Heat Fab 9401BG Saf-T Vent EZ Seal 4" Diameter Blast Gate. Use to balance the draft of an appliance when the vent is terminated with a fan.

Usually Ships in 24 Hours
List Price: $119.07
Our Low Price: 82.95
(Out of Stock)
Heat Fab 73EXPKIT Saf-T Vent EZ Seal Field Expander Kit Heat Fab 73EXPKIT Saf-T Vent EZ Seal Field Expander Kit

  • Heat Fab 73EXPKIT  
  • Field Expander Kit
A field expander kit is only available for 3" diameter Saf-T Vent installations
The field expander is a tool the installer can use to recreate the male taper on a cutoff piece of pipe.

Usually Ships in 24 Hours
List Price: $76.44
Our Low Price: 52.95
1 in stock!
Heat Fab 5381CI Saf-T Vent 3" Diameter - Roof Flashing 2" to 8" Pitch Heat Fab 5381CI Saf-T Vent 3" Diameter - Roof Flashing 2" to 8" Pitch

  • Heat Fab 5381CI
  • 3" Diamete
  • Roof Flashing 2" to 8" Pitch
  • Saf-T Ven
  • tFor use with single-wall or double-wall
  • Saf-T Vent systems with vertical terminations
  • Can be used on roofs with a 2/12 - 8/12 pitch
  • This part comes with a tall storm collar and is made of all stainless steel construction
  • On single wall Saf-T Vent applications the roof must be of non-combustible material

Usually Ships in 24 Hours
List Price: $238.04
Our Low Price: 166.95
2 in stock!
Heat Fab 5481CI Saf-T Vent 4" Diameter - Roof Flashing 2" to 8" Pitch Heat Fab 5481CI Saf-T Vent 4" Diameter - Roof Flashing 2" to 8" Pitch

  • Heat Fab 5481CI 
  • 4" Diameter
  • Roof Flashing 2" to 8" Pitch
  • Saf-T VentFor use with single-wall or double-wall Saf-T Vent systems with vertical terminations
  • Can be used on roofs with a 2/12 - 8/12 pitch
  • This part comes with a tall storm collar and is made of all stainless steel construction
  • On single wall Saf-T Vent applications the roof must be of non-combustible material

Usually Ships in 24 Hours
List Price: $282.73
Our Low Price: 204.95
1 in stock!
Heat Fab 5482CI Saf-T Vent 4" Diameter - Roof Flashing Flat Heat Fab 5482CI Saf-T Vent 4" Diameter - Roof Flashing Flat

  • Heat Fab 5482CI
  • 4" Diameter
  • Roof Flashing Flat
  • Saf-T Vent
  • For use with single-wall or double-wall Saf-T Vent systems with vertical terminations
  • This part comes with a tall storm collar and is made of all stainless steel construction
  • On single wall Saf-T Vent applications the roof must be of non-combustible material

Usually Ships in 1 to 2 Weeks
List Price: $245.25
Our Low Price: 171.95
Heat Fab 5382CI Saf-T Vent 3" Diameter - Roof Flashing Flat Heat Fab 5382CI Saf-T Vent 3" Diameter - Roof Flashing Flat

  • Heat Fab 5382CI
  • 3" Diameter
  • Roof Flashing FlatSaf-T Vent
  • For use with single-wall or double-wall Saf-T Vent systems with vertical terminations
  • This part comes with a tall storm collar and is made of all stainless steel construction
  • On single wall Saf-T Vent applications the roof must be of non-combustible material

Usually Ships in 1 to 2 Weeks
List Price: $223.55
Our Low Price: 159.95
Heat Fab 4627SS Saf-T Vent 6" Diameter - 304 Support Clamp Heat Fab 4627SS Saf-T Vent 6" Diameter - 304 Support Clamp

  • Heat Fab 4527SS
  • 6" Diameter
  • Support Clamp
  • Saf-T Vent
  • Made from Type 304 stainless steel
  • Use on horizontal systems to provide support at the required 6-foot intervals

Usually Ships in 24 Hours
List Price: $19.41
Our Low Price: 16.45
10 in stock!
Heat Fab - 6Inch Diameter - 304 STORM COLLAR Heat Fab 4626SS Saf-T Vent EZ Seal - 6 Inch Diameter - 304 STORM COLLAR

  • Heat Fab 4626SS Saf-T Vent EZ Seal
  • 6" Diameter
  • 304 STORM COLLAR
  • Saf-T Vent EZ Seal
  • AL29-4C Stainless Steel

Usually Ships in 24 Hours
List Price: $26.66
Our Low Price: 22.65
12 in stock!
Heat Fab - 8Inch Diameter - 304 STORM COLLAR Heat Fab 4826SS Saf-T Vent EZ Seal - 8 Inch Diameter - 304 STORM COLLAR

  • Heat Fab 4826SS Saf-T Vent EZ Seal
  • 8" Diameter
  • 304 STORM COLLAR
  • Saf-T Vent EZ Seal
  • AL29-4C Stainless Steel

Usually Ships in 24 Hours
List Price: $33.98
Our Low Price: 28.85
11 in stock!