You are here: Home > Venting

Venting & Ducting Supplies

For large- and small-scale venting projects, you’ll find all the venting parts and supplies you need right here at SDS Market. We carry venting parts and supplies from HeatFab, Z-Flex and Ubbink, three brands trusted for their versatility and reliability in all sorts of applications and setups. Whether you’re looking for ducting supplies for pool heaters, furnaces, boilers or any other appliance, our HVAC duct supply can handle the job. All of our air duct parts are simple to install, require little to no added sealant, and pass rigorous ANSI standards to operate safely and efficiently with minimal maintenance. Many of our venting parts and supplies can ship from our warehouses in as little as 24 hours, and we offer free shipping on select orders of $199 or more. The next time a project calls for reliable and simple ducting supplies, shop with confidence at SDS Market!

  • HeatFab EZ Seal Vent Pipe

    HeatFab
    Saf-T Vent EZ Seal
    AL29-4C Stainless Steel
    Single Wall
    3” through 16” Diameters
    Now, the strongest special gas vent is also the easiest to install. With new integral seal, and the patented Ring and Tab closure system, Saf-T Vent EZ Seal is the fastest and most reliable venting solution for Category I, II, III and IV gas appliances – with no RTV sealant required.
  • HeatFab SC Vent Pipe

    HeatFab
    Saf-T Vent SC
    AL29-4C Stainless Steel
    Double Wall
    Concentric Vent System
    3/5” and 4/7" Diameters
     
    HeatFab Saf-T Vent SC is a concentric vent system designed for zero clearance installation in residential and light commercial applications. It is approved for use on ANSI category I, II, III, and IV Gas-burning appliances, and direct vent or sealed combustion appliances approved by the appliance manufacturer.
  • Ubbink Concentric Vent

    Ubbink
    Rolux Condensing Vent System
     
    The Ubbink Rolux Concentric Vent System is used on a variety on tankless heaters such as A.O. Smith, GE, Rinnai, State Industries and many more.
  • Z-Vent SVE Vent Pipe

    Z-Flex
    Z-Vent SVE Vent Pipe
    AL29-4C Stainless Steel
    Single Wall
    3" & 4" Diameters
     
    Z-Vent is designed for use with Boilers, High Efficiency Furnaces, Pool heaters, unit Heaters, and Water Heaters. The female end of each Z-Vent component incorporates a Double Fail Safe self sealing gasket. No sealant is required.
  • Ventilation Fans

    Ventilation Fans
    A variety of exhaust fans for all types of applications.
Sort By:
Page of 2
Ubbink 224050 45 Degree Elbows - 2-Pack Ubbink 224050 45 Degree Elbows - 2-Pack

  • Ubbink 224050 45 Degree Elbows - 2-Pack
  • Zero clearance to combustibles
  • Easy assembly
  • AOS & State Part # 9006506005

Usually Ships in 24 Hours
List Price: $101.50
Our Low Price: $64.95 LIMITED QUANTITIES
2 in stock!
Ubbink 224053 Vent Pipe Extension - 39" Length Ubbink 224053 Vent Pipe Extension - 39" Length

  • Ubbink 224053 Vent Pipe Extension
  • 39" Length
  • Zero clearance to combustibles
  • Easy assembly
  • AOS & State Part # 9006510005

Usually Ships in 24 Hours
List Price: $91.00
Our Low Price: $62.95
2 in stock!
Ubbink 184118-S Roof Discharge Terminal - 18" Above Roof - 21" Length Below Roof Ubbink 184118-S Roof Discharge Terminal - 18" Above Roof

  • Ubbink 184118-S Roof Discharge Terminal
  • 18" Above Roof - 21" Length Below Roof
  • Zero clearance to combustibles
  • Easy assembly
  • AOS & State Part # 9006499005

Usually Ships in 24 Hours
List Price: $168.50
Our Low Price: $139.95
1 in stock!
Ubbink 184119 Roof Discharge Terminal - 38" Above Roof Ubbink 184119 Roof Discharge Terminal - 38" Above Roof

  • Ubbink 184119 Roof Discharge Terminal
  • 38" Above Roof
  • Zero clearance to combustibles
  • Easy assembly
  • AOS & State Part # 9006500005

Usually Ships in 24 Hours
List Price: $207.50
Our Low Price: $149.95
(Out of Stock)
(1)
Ubbink 224046 Raised Horizontal Termination Kit (Snorkel) Ubbink 224046 Raised Horizontal Termination Kit (Snorkel)

  • Ubbink 224046 Raised Horizontal Termination Kit (Snorkel)
  • Raise the termination between 23.5-31.5 inches
  • Zero clearance to combustibles
  • Easy assembly
  • AOS & State Part # 9006577005

Usually Ships in 24 Hours
List Price: $885.10
Our Low Price: $599.95
2 in stock!
Ubbink 224045 Thimble Ubbink 224045 Thimble

  • Ubbink 224045 Thimble
  • For new construction installations
  • Zero clearance to combustibles
  • Easy assembly
  • AOS & State Part # 701022-286

Usually Ships in 24 Hours
List Price: $59.99
Our Low Price: $43.95
2 in stock!
Broan 678 Ventilation Ceiling and Wall Mount Fan with Light - 50 CFM Broan 678 Ventilation Ceiling and Wall Mount Fan with Light - 50 CFM

  • Broan 678 Ventilation Ceiling and Wall Mount Fan with Light
  • 50 CFM, 2.5 Sones
  • Duct Size: 4" Round
  • Bright 100-watt lighting capacity
  • Bulb not included
  • Shatter-resistant light diffusing lens
  • Type IC (Insulation Contact)
  • Designer styled white polymeric grille complements virtually any decor
  • Plug-in, permanently lubricated motor

Usually Ships in 24 Hours
List Price: $98.22
Our Low Price: $42.95
(Out of Stock)
Z-Flex 2SVEEWCF0345 SVE Vent AL29-4C - Single Wall - 3" Diameter - 45 Degree Elbow Z-Flex 2SVEEWCF0345 AL29-4C Vent - Single Wall - 3" Diameter - 45 Degree Elbow

  • Z-Flex 2SVEEWCF0345
  • 3" Diameter
  • 45 Degree Elbow
  • Single Wall
  • 45° elbows are used when a direction change or offset is required
  • Made of AL29-4C stainless steel
  • Model SVE Special Gas Vent System
  • Simple gasketed connection - no sealant needed

Usually Ships in 24 Hours
List Price: $72.92
Our Low Price: $38.95
3 in stock!
Z-Flex 2SVEEWCF0390 SVE Vent AL29-4C - Single Wall - 3" Diameter - 90 Degree Elbow Z-Flex 2SVEEWCF0390 AL29-4C Vent - Single Wall - 3" Diameter - 90 Degree Elbow

  • Z-Flex 2SVEEWCF0390
  • 3" Diameter
  • 90 Degree Elbow
  • Single Wall
  • 90° elbows are used when a direction change or offset is required
  • Made of AL29-4C stainless steel
  • Model SVE Special Gas Vent System
  • Simple gasketed connection - no sealant needed

Usually Ships in 24 Hours
List Price: $79.85
Our Low Price: $42.95
1 in stock!
Z-Flex 2SVEPWCF03.5 AL29-4C Vent - Single Wall - 3" Diameter- 6" Straight Length Z-Flex 2SVEPWCF03.5 AL29-4C Vent - Single Wall - 3" Diameter- 6" Straight Length

  • Z-Flex 2SVEPWCF03.5
  • 3" Diameter
  • 6" Straight Length 
  • Single Wall
  • Made of AL29-4C stainless steel
  • Model SVE Special Gas Vent System
  • Simple gasketed connection - no sealant needed

Usually Ships in 24 Hours
List Price: $22.83
Our Low Price: $12.95
4 in stock!
Z-Flex 2SVEPWCF0301 AL29-4C Vent - Single Wall - 3" Diameter- 12" Straight Length Z-Flex 2SVEPWCF0301 AL29-4C Vent - Single Wall - 3" Diameter- 12" Straight Length

  • Z-Flex 2SVEPWCF0301
  • 3" Diameter
  • 12" Straight Length 
  • Single Wall
  • Made of AL29-4C stainless steel
  • Model SVE Special Gas Vent System
  • Simple gasketed connection - no sealant needed

Usually Ships in 24 Hours
List Price: $29.09
Our Low Price: $16.95
(Out of Stock)
Z-Flex 2SVEPWCF0301.5 AL29-4C Vent - Single Wall - 3" Diameter- 18" Straight Length Z-Flex 2SVEPWCF0301.5 AL29-4C Vent - Single Wall - 3" Diameter- 18" Straight Length

  • Z-Flex 2SVEPWCF0301.5
  • 3" Diameter
  • 18" Straight Length 
  • Single Wall
  • Made of AL29-4C stainless steel
  • Model SVE Special Gas Vent System
  • Simple gasketed connection - no sealant needed

Usually Ships in 24 Hours
List Price: $46.23
Our Low Price: $24.95
4 in stock!
Z-Flex 2SVEPWCF0302 AL29-4C Vent - Single Wall - 3" Diameter- 24" Straight Length Z-Flex 2SVEPWCF0302 AL29-4C Vent - Single Wall - 3" Diameter- 24" Straight Length

  • Z-Flex 2SVEPWCF0302
  • 3" Diameter
  • 24" Straight Length 
  • Single Wall
  • Made of AL29-4C stainless steel
  • Model SVE Special Gas Vent System
  • Simple gasketed connection - no sealant needed

Usually Ships in 5 to 7 Business Days
List Price: $58.66
Our Low Price: $32.95
(Out of Stock)
Z-Flex 2SVEPWCF0303 AL29-4C Vent - Single Wall - 3" Diameter- 36" Straight Length Z-Flex 2SVEPWCF0303 AL29-4C Vent - Single Wall - 3" Diameter- 36" Straight Length

  • Z-Flex 2SVEPWCF0303
  • 3" Diameter
  • 36" Straight Length 
  • Single Wall
  • Made of AL29-4C stainless steel
  • Model SVE Special Gas Vent System
  • Simple gasketed connection - no sealant needed

Usually Ships in 24 Hours
List Price: $73.15
Our Low Price: $39.95
1 in stock!
Z-Flex 2SVEPWCF0304 AL29-4C Vent - Single Wall - 3" Diameter- 48" Straight Length Z-Flex 2SVEPWCF0304 AL29-4C Vent - Single Wall - 3" Diameter- 48" Straight Length

  • Z-Flex 2SVEPWCF0304
  • 3" Diameter
  • 48" Straight Length
  • Single Wall
  • Made of AL29-4C stainless steel
  • Model SVE Special Gas Vent System
  • Simple gasketed connection - no sealant needed

Usually Ships in 24 Hours
List Price: $97.96
Our Low Price: $57.95
(Out of Stock)
Z-Flex 2SVSTTF03 AL29-4C Vent - Single Wall - 3" Diameter- Termination Tee Z-Flex 2SVSTTF03 AL29-4C Vent - Single Wall - 3" Diameter- Termination Tee

  • Z-Flex 2SVSTTF03
  • 3" Diameter 
  • Termination Tee
  • Used to connect horizontal and vertical vent sections
  • Single Wall
  • Made of AL29-4C stainless steel
  • Model SVE Special Gas Vent System
  • Simple gasketed connection - no sealant needed

Usually Ships in 24 Hours
List Price: $64.35
Our Low Price: $26.95
1 in stock!
Z-Flex 2SVSNA03.5 AL29-4C Vent - Single Wall - 3" Diameter - Universal Adapter Z-Flex 2SVSNA03.5 AL29-4C Vent - Single Wall - 3" Diameter - Universal Adapter

  • Z-Flex 2SVSNA03.5 Universal Adapter
  • 3" Diameter
  • Universal Adapter
  • For use with Laars, Aquastar, Nortec, Takagi, Reznor, Modine, Paloma, & Rheem
  • Single Wall Made of AL29-4C stainless steel
  • Model SVE Special Gas Vent System
  • Simple gasketed connection - no sealant needed

Usually Ships in 24 Hours
List Price: $37.10
Our Low Price: $21.95
2 in stock!
Z-Flex 2SVSHF03 AL29-4C Vent - Single Wall - 3" Diameter - Saf-T Vent to Z-Vent Adapter Z-Flex 2SVSHF03 AL29-4C Vent - Single Wall - 3" Diameter - Saf-T Vent to Z-Vent Transition

  • Z-Flex 2SVSHF03 Saf-T Vent to Z-Vent Transition
  • 3" Diameter
  • Transitions appliances with 3" Saf-T vent flue outlets to Z-Vent pipe
  • Single Wall Made of AL29-4C stainless steel
  • Model SVE Special Gas Vent System
  • Simple gasketed connection - no sealant needed

Usually Ships in 24 Hours
List Price: $33.44
Our Low Price: $22.95
(Out of Stock)
Z-Flex 2SVSPA03 AL29-4C Vent - Single Wall - 3" Diameter- Adjustable Straight Length Z-Flex 2SVSPA03 AL29-4C Vent - Single Wall - 3" Diameter- Adjustable Straight Length

  • Z-Flex 2SVSPA03
  • 3" Diameter
  • Adjustable Straight Length
  • Single Wall
  • Made of AL29-4C stainless steel
  • Model SVE Special Gas Vent System
  • Simple gasketed connection - no sealant needed

Usually Ships in 24 Hours
List Price: $52.34
Our Low Price: $27.95
2 in stock!
Z-Flex 2SVSRCF03 AL29-4C Vent - Single Wall - 3" Diameter - Rain Cap Z-Flex 2SVSRCF03 AL29-4C Vent - Single Wall - 3" Diameter - Rain Cap

  • Z-Flex 2SVSRCF03
  • 3" Diameter
  • Rain Cap with Wind Band
  • Single Wall
  • Made of AL29-4C stainless steel
  • Model SVE Special Gas Vent System
  • Simple gasketed connection - no sealant needed

Usually Ships in 24 Hours
List Price: $94.99
Our Low Price: $46.95
(Out of Stock)